If you’re planning to make it to the International Space Development Conference in San Juan, Puerto Rico next month, be advised that Brian McConnell will be there with thoughts on a subject we’ve discussed in several earlier posts: A ‘spacecoach’ that uses water as a propellant and offers a practical way to move large payloads (and crews) around the Solar System. Based in San Francisco, Brian is a technology entrepreneur who doubles as a software/electrical engineer. In the essay below, he looks at the spacecoach in relation to the Breakthrough Starshot initiative, where synergies come into play that may benefit both concepts.

by Brian McConnell

McConnell

The spacecoach is a design pattern for a reusable solar electric spacecraft, previously featured on Centauri Dreams here and developed in A Design for a Reusable Water-Based Spacecraft Known as the Spacecoach (Springer Verlag), which I wrote with Alex Tolley. It primarily uses water as its propellant. This design has numerous benefits, chief among them the ability to turn consumables, ordinarily deadweight, into working mass.

The recent announcement of the Breakthrough Starshot project, which aims to use beamed power to drive ultra lightweight lightsail probes on interstellar trajectories, is of note. This same infrastructure could be used to augment the capabilities and range of spacecoaches (or any solar electric spacecraft), while providing a near-term use for beamed power infrastructure as it is developed and scaled up.

The spacecoach design pattern combines a medium sized solar array (sized to generate between 500 kilowatts and 2 megawatts of peak power at 1AU) with electric propulsion units that use water as propellant (and possibly also waste streams such as carbon dioxide, ammonia, etc). We found that, even when constrained to these power levels, they could fly approximately Hohmann trajectories to and from destinations in the inner solar system. Because consumables are converted into propellant, this reduces mass budgets by an order of magnitude, and effectively eliminates the need for an external interplanetary stage, all while greatly simplifying the logistics of supporting a sizeable crew for long duration missions (more consumables = more propellant).

Fig01

The primary constraint for space coaches, especially if you want to travel to the outer solar system, is available power. This is an issue for two reasons. First, solar flux drops off by 1/r2, so at Jupiter, a solar array will generate roughly 1/25th the power as it does at Earth distance. Second, trips to more distant locations will typically require a greater delta V (and thus higher exhaust velocity to achieve this with a given amount of propellant). The amount of energy required to generate a unit of impulse scales linearly with exhaust velocity, so the net result is the ship’s power requirements are increased, all while the powerplant’s power density (watts per kilogram of solar array) is decreased.

Testing Beamed Power

Beamed power infrastructure would enable space coaches and solar electric spacecraft in general to operate at higher power levels for a given array size, which would enable them to operate at higher thrust levels, and to utilize higher exhaust velocities to maximize delta V and propellant efficiency. This means they would be able to accelerate faster, achieve higher delta-v, while using less propellant. In effect beamed power to SEP spacecraft will give their operators the equivalent of a nuclear electric power plant (without the nukes).

A spacecoach built for solar only operation would be able to serve as a testbed for beamed power. For example, a space coach departing Earth orbit could be illuminated with a beam that increases its power output by a small amount, say 10% (large enough to make a measurable difference in performance, yet small enough that major modifications are not required to the ship as it just experiences slightly brighter illumination while in beam). At higher light levels, this technique could also be used to simulate lighting and heat loading conditions expected at the inner planets while remaining in near Earth space. Note also that lasers can be tuned to the absorption wavelength(s) of the photovoltaic material, greatly improving conversion efficiency (and reducing heat gain per unit of power delivered). An even cheaper way to build out and test power beaming infrastructure will be with satellites and probes that utilize solar electric propulsion.

The pathway to a system based primarily on beamed power then becomes one based on incremental improvements, both for the ground based facilities and for the ships. This would result in near term applications for the beamed power facilities while the much more technically challenging aspects of the starshot project are sorted out. Meanwhile, satellite and space coach operators could test ships with ever higher levels of beamed power until they hit a limit (heat rejection is probably the main limit to how much power can be concentrated per unit of sail area, as this is similar to concentrated photovoltaics).

The chart below illustrates the power/performance curve by showing the amount of impulse that can theoretically be generated per megawatt hour using electric propulsion, as a function of exhaust velocity. Real world performance will be somewhat lower due to efficiency losses, but this shows the relationship between thrust, ve and power. We see that impulse per MWh varies from 72,000 kg-m/s (ion drive, ve ~ 100,000 m/s) to 1,400,000 kg-m/s (RF arcjet, ve ~ 5000 m/s). A Hall Effect thruster, a flight proven technology, would yield about 300,000 kg-m/s per MWh. Compare this to pure photonic propulsion, which would yield only 12 to 24 kg-m/s per MWh. Clearly photonic propulsion will be necessary to achieve a delta v of 0.2c, but for more pedestrian applications such as satellite orbit raising, launching interplanetary probes or cargo ships from LEO to BEO (beyond earth orbit), electric propulsion will work well at power levels many orders of magnitude lower than what’s required for a starshot.

fig02

Driver for an Interplanetary Infrastructure?

Closer to home there could be lots of opportunities to sell beamed power to space operators. It’s costly to launch large payloads beyond low earth orbit (which isn’t cheap in the first place). Meanwhile, payload fairings limit the size of self-deploying solar arrays, which limits the use of electric propulsion for satellites and probes. If one could launch spacecraft with small solar arrays to LEO, and then use beamed power to amplify their power budget they could use electric propulsion to boost themselves to their desired orbits or interplanetary trajectories within a reasonable time frame. The beamed power infrastructure can also be built up incrementally. Early systems would beam 100 kilowatts to 10 megawatts of power to targets measuring meters to tens of meters in diameter. This should be readily achievable, and can be scaled up from there in terms of power output, beam precision, etc. The result: lower costs per kilogram to deliver a payload to its destination or desired orbit compared to all chemical propulsion.

This could make electric propulsion for transit from LEO to GEO and beyond an attractive option. Meanwhile, the power beaming operator would accrue lots of operational experience with beam shaping, tracking objects in orbit, etc, all things that will need to be mastered for the starshot project, while providing an economic foundation for the power beaming facilities during the buildup to their intended purpose.

In fact, one can imagine the starshot project becoming a profitable LEO to BEO (beyond earth orbit) launch operator in its own right. The terrestrial power beaming infrastructure is one component. A standardized “power sail” that can be fitted to many different payloads, from geostationary satellites to interplanetary probes, is another. The power sail would consist of a self-deploying solar array that is sized to work well with beamed power, heat rejection gear, and electric propulsion units. It would use beamed power during its boost phase to rapidly accrue velocity for its planned trajectory, and then as it leaves near Earth space, would transition to use ambient light as its power source from there. Meanwhile these power sails would provide an evolutionary path from conventional spacecraft to solar electric propulsion to the nanocraft envisioned for purely photonic propulsion.

As a starting point, it would be interesting to conduct ground based vacuum chamber tests to see how a variety of PV materials respond to being illuminated with concentrated laser light tuned to their peak absorption wavelengths. What do the conversion efficiencies look like? How much waste heat is generated? How do the materials perform at high temperatures in simulated in-beam conditions? Building on that one can imagine experiments involving cubesats to validate the data from those experiments in real world conditions, and if that all works out, one could scale up from there to build out beamed power infrastructure for use by many types of solar electric vehicles.

Ambitious R&D projects have a way of generating unintended side benefits. It’s possible that the starshot initiative, in addition to being our first step toward the stars, will also make great contributions to travel and exploration within the solar system.

tzf_img_post